PRODUCT
Diamond Coated End Mills - Special End Mills
2DDML
Helix angle 30⁰2 flutesCoating : DIA
PRODUCT INFORMATION
Diamond Coated Square Type For Graphite - Long Type 2 Flutes
Coated with Diamond Coating. It provides extremely high hardness, strength, thermal conductivity. Therefore, the tool lifespan is much better than normal end mills.
Application: Graphite, Fiberglass Material, Composites
Coated with Diamond Coating. It provides extremely high hardness, strength, thermal conductivity. Therefore, the tool lifespan is much better than normal end mills.
Application: Graphite, Fiberglass Material, Composites
SPECIFICATION
Model | Diameter | Flute Length | Effective Length | Total Length | Shank Diameter | Flutes |
---|---|---|---|---|---|---|
010030050 | 1 | 3 | - | 50 | 4 | 2 |
010050050 | 1 | 3 | 5 | 50 | 4 | 2 |
010100050 | 1 | 3 | 10 | 50 | 4 | 2 |
010150050 | 1 | 3 | 15 | 50 | 4 | 2 |
010200050 | 1 | 3 | 20 | 50 | 4 | 2 |
010250050 | 1 | 3 | 25 | 50 | 4 | 2 |
015060050 | 1.5 | 6 | - | 50 | 4 | 2 |
015100050 | 1.5 | 6 | 10 | 50 | 4 | 2 |
015150050 | 1.5 | 6 | 15 | 50 | 4 | 2 |
015200050 | 1.5 | 6 | 20 | 50 | 4 | 2 |
015250050 | 1.5 | 6 | 25 | 50 | 4 | 2 |
020080075 | 2 | 8 | - | 75 | 4 | 2 |
020120075 | 2 | 8 | 12 | 75 | 4 | 2 |
020150075 | 2 | 8 | 15 | 75 | 4 | 2 |
020200075 | 2 | 8 | 20 | 75 | 4 | 2 |
020250075 | 2 | 8 | 25 | 75 | 4 | 2 |
020300075 | 2 | 8 | 30 | 75 | 4 | 2 |
020400075 | 2 | 8 | 40 | 75 | 4 | 2 |
030120075 | 3 | 12 | - | 75 | 4 | 2 |
030200075 | 3 | 12 | 20 | 75 | 4 | 2 |
030250075 | 3 | 12 | 25 | 75 | 4 | 2 |
030300075 | 3 | 12 | 30 | 75 | 4 | 2 |
030400075 | 3 | 12 | 40 | 75 | 4 | 2 |
040160075 | 4 | 16 | - | 75 | 4 | 2 |
050200100 | 5 | 20 | - | 100 | 6 | 2 |
060250100 | 6 | 25 | - | 100 | 6 | 2 |
060250150 | 6 | 25 | - | 150 | 6 | 2 |
080400150 | 8 | 25 | 40 | 150 | 8 | 2 |
100500150 | 10 | 25 | 50 | 150 | 10 | 2 |
120600150 | 12 | 25 | 60 | 150 | 12 | 2 |
OTHER INFOMATION