PRODUCT
Diamond Coated End Mills - Special End Mills
4DDMH
Helix angle 30⁰4 flutesCoating : DIA
PRODUCT INFORMATION
Diamond Coated Square Type For Graphite - 4 Flutes
Coated with Diamond Coating. It provides extremely high hardness, strength, thermal conductivity. Therefore, the tool lifespan is much better than normal end mills.
Application: Graphite, Fiberglass Material, Composites
Coated with Diamond Coating. It provides extremely high hardness, strength, thermal conductivity. Therefore, the tool lifespan is much better than normal end mills.
Application: Graphite, Fiberglass Material, Composites
SPECIFICATION
| Model | Diameter | Flute Length | Total Length | Shank Diameter | Flutes |
|---|---|---|---|---|---|
| 020060050 | 2 | 6 | 50 | 4 | 4 |
| 020100050 | 2 | 10 | 50 | 4 | 4 |
| 030090050 | 3 | 9 | 50 | 6 | 4 |
| 030150050030 | 3 | 15 | 50 | 3 | 4 |
| 030150050 | 3 | 15 | 50 | 4 | 4 |
| 040120050 | 4 | 12 | 50 | 6 | 4 |
| 040200050 | 4 | 20 | 50 | 4 | 4 |
| 060180050 | 6 | 18 | 50 | 6 | 4 |
| 060250100 | 6 | 25 | 100 | 6 | 4 |
| 060250150 | 6 | 25 | 150 | 6 | 4 |
| 080240075 | 8 | 24 | 75 | 8 | 4 |
| 080350100 | 8 | 35 | 100 | 8 | 4 |
| 080350150 | 8 | 35 | 150 | 8 | 4 |
| 100250075 | 10 | 25 | 75 | 10 | 4 |
| 100400100 | 10 | 40 | 100 | 10 | 4 |
| 120250075 | 12 | 25 | 75 | 12 | 4 |
| 120450100 | 12 | 45 | 100 | 12 | 4 |
OTHER INFOMATION
