PRODUCT
Diamond Coated End Mills - Special End Mills
2DDMR
Helix angle 30⁰2 flutesCoating : DIA
PRODUCT INFORMATION
Diamond Coated Ball Nose For Graphite - 2 Flutes
Coated with Diamond Coating. It provides extremely high hardness, strength, thermal conductivity. Therefore, the tool lifespan is much better than normal end mills.
Application: Graphite, Fiberglass Material, Composites
Coated with Diamond Coating. It provides extremely high hardness, strength, thermal conductivity. Therefore, the tool lifespan is much better than normal end mills.
Application: Graphite, Fiberglass Material, Composites
SPECIFICATION
| Model | Diameter | Flute Length | Total Length | Shank Diameter | Flutes |
|---|---|---|---|---|---|
| 0054050 | 0.25R | 1 | 50 | 4 | 2 |
| 0064050 | 0.3R | 1.2 | 50 | 4 | 2 |
| 0084050 | 0.4R | 2 | 50 | 4 | 2 |
| 0104050 | 0.5R | 2.5 | 50 | 4 | 2 |
| 0154050 | 0.75R | 4 | 50 | 4 | 2 |
| 0204050 | 1R | 5 | 50 | 4 | 2 |
| 0254050 | 1.25R | 6 | 50 | 4 | 2 |
| 0306060 | 1.5R | 8 | 60 | 6 | 2 |
| 0406075 | 2R | 8 | 75 | 6 | 2 |
| 0506075 | 2.5R | 10 | 75 | 6 | 2 |
| 0606075 | 3R | 12 | 75 | 6 | 2 |
| 0606100 | 3R | 12 | 100 | 6 | 2 |
| 0808075 | 4R | 14 | 75 | 8 | 2 |
| 0808100 | 4R | 14 | 100 | 8 | 2 |
| 1010075 | 5R | 18 | 75 | 10 | 2 |
| 1010100 | 5R | 18 | 100 | 10 | 2 |
| 1212075 | 6R | 22 | 75 | 12 | 2 |
| 1212100 | 6R | 22 | 100 | 12 | 2 |
OTHER INFOMATION
